Road safety and theft prevention
Before driving
In this manual: Road safety and theft prevention
~2min read
Floor mats
Use only floor mats specifically designed for the make, model and model year of your vehicle. Secure them firmly to the carpet.
1. Insert the retaining clips into the holes in the floor mat.

2. Turn the top of each retaining clip to secure the floor mats firmly in place.
*: Always align the marks
.

The retaining clips may differ in shape from those illustrated.
WARNING Observe the following precautions.Otherwise, the floor mat may slide toward the driver's side and interfere with pedal operation while driving. This could result in unintended acceleration or difficulty stopping the vehicle, which could cause a serious or fatal accident.
■ When installing the driver's side floor mat
- Do not use floor mats designed for a different model or model year than your vehicle, even if they are genuine Toyota floor mats.
- Use only floor mats designed for the driver's side.
- Always secure the floor mat in place with the retaining clips provided.
- Do not stack multiple floor mats on top of each other.
- Do not install the floor mat with its underside facing up, or vice versa.
■ Before driving
- Check that the floor mat is properly secured in the correct position with all the retaining clips provided.
In particular, be sure to check this after every floor cleaning.
- With the engine off and the shift lever in P (Multidrive) or N (manual transmission), press each pedal fully to the floor to check that its movement is not obstructed by the floor mat.

Was this page helpful?