How to Use Troubleshooting
PRECAUTION / NOTICE / HINT
HINT:
- Follow the procedure below to troubleshoot the seat heater system.
- *: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
|
CUSTOMER PROBLEM ANALYSIS
HINT:
- When troubleshooting, make sure the symptoms of the problem have been correctly identified. Any preconceptions must be set aside in order to make an accurate judgment. To clearly understand the actual symptoms of the problem, it is essential to ask the customer about the nature of the problem and the conditions under which it occurred.
- Gather as much information as possible for reference. Previous problems that do not appear related to the current problem may also be very useful in some cases.
- The following 5 elements are essential for analyzing the problem:
What |
Vehicle model, system name |
When |
Date, time, frequency of occurrence, whether the problem appeared recently or has been occurring for a long time |
Where |
If the problem occurs at a specific location |
What were the conditions? |
Doors locked or unlocked, ignition switch ON, engine started. |
How did it happen? |
Problem Symptoms |
|
CHECK BATTERY VOLTAGE
(a) Measure the battery voltage.
Standard voltage:
11 à 14 V
If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.
(b) Check the fuses and relays.
(c) Check the connectors and terminals for any abnormality, such as loose connections, deformation, etc.
|
CHECK FOR DTC (AIR CONDITIONING SYSTEM)*
(a) Clear the DTCs.
- TMMT production:
Click here
.gif)
- TMC production:
Click here
.gif)
(b) Check DTCs.
- TMMT production:
Click here
.gif)
- TMC production:
Click here
.gif)
OK:
No DTCs are output
Result:
Result | Proceed to |
|---|---|
OK |
A |
NG (for TMMT manufactured) |
B |
NG (for TMC manufactured) |
C |
| B | GO TO AIR CONDITIONING SYSTEM |
| C | GO TO AIR CONDITIONING SYSTEM |
|
CHECK FOR DTC (SEAT HEATER SYSTEM)*
(a) Clear the DTCs.
Click here![]()
(b) Check the DTCs again.
Click here![]()
Result:
Result | Proceed to |
|---|---|
No DTCs are output |
A |
DTCs are output |
B |
| B | GO TO DIAGNOSTIC TROUBLE CODE CHART |
|
SYMPTOM TROUBLESHOOTING TABLE
(a) Refer to the Symptom Troubleshooting Table.
Click here![]()
Result:
Result | Proceed to |
|---|---|
The malfunction is not listed in the Problem Symptoms Table |
A |
The malfunction is listed in the Problem Symptoms Table |
B |
| B | ADJUST, REPAIR OR REPLACE ACCORDING TO THE SYMPTOM TABLE |
|
GENERAL ANALYSIS AND TROUBLESHOOTING*
(a) Operation Check
Click here![]()
(b) ECU Terminals
Click here![]()
(c) Inspection
|
REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | END |