Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL
Click here![]()
2. REMOVE FRONT BUMPER ASSEMBLY
Click here![]()
3. REMOVE FRONT FENDER GARNISH SUB-ASSEMBLY
Click here![]()
4. REMOVE ROCKER PANEL MOULDING LH
Click here![]()
5. REMOVE FRONT FENDER LINER LH
(a) Remove the 2 screws, 7 clips and front fender liner LH.
6. REMOVE RADIATOR GRILLE RETAINER NO. 1
Click here![]()
7. REMOVE RADIATOR SUPPORT SEAL NO. 1
Click here![]()
8. REMOVE HOOD LOCK NUT CAP
Click here![]()
9. REMOVE HOOD LOCK ASSEMBLY (with engine room courtesy light switch)
Click here![]()
10. REMOVE HOOD LOCK ASSEMBLY (without engine room courtesy light switch)
(a) Remove the 2 bolts and hood lock bolt. |
|
(b) Release the guide to remove the hood lock assembly from the hood lock control cable assembly. |
![]() |
11. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Click here![]()
12. REMOVE HOOD LOCK CONTROL CABLE BRACKET
(a) Release the claw to remove the hood lock control cable bracket as shown in the illustration.
![]() |
Remove in this direction |
13. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Remove the hood lock control lever sub-assembly from the hood lock control cable assembly. |
![]() |
14. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Disconnect the hood lock control cable assembly from the clips.
*a |
Grommet |
- |
- |
(b) Release the grommet.
(c) Pull the hood lock control cable assembly out from the engine compartment to remove it.


.png)
