Driving

Rear window wiper and washer

3steps
~18min
2/5difficulty
Done 0 of 3

Operating Instructions

To select the rear wiper operating mode, use the control lever as follows:

  1. Toyota CH-R. Utilisation des éclairages et des essuie-glacesRear window intermittent wiping
  2. Toyota CH-R. Utilisation des éclairages et des essuie-glacesRear window normal wiping
    Toyota CH-R. Utilisation des éclairages et des essuie-glaces
  3. Washer with automatic wiping

After washer fluid is sprayed, the rear wiper wipes 2 or 3 times.

Toyota CH-R. Utilisation des éclairages et des essuie-glaces

■ Rear window wiper and washer operating conditions

Vehicles without a smart entry & start system

The engine start switch is in the "ON" position.

Vehicles with a smart entry & start system

The engine start switch is in START mode.

■ If the windshield washer does not operate If there is washer fluid in the reservoir, check that the washer nozzle is not clogged.

NOTE

■ When the rear window is dry Do not use the wiper, as this may damage the rear window.

■ When the washer fluid reservoir is empty Do not operate the control lever continuously, as this may overheat the washer fluid pump.

■ If a nozzle becomes clogged In this case, contact a Toyota dealer, an authorized Toyota repairer, or any reliable repairer.

Do not try to clear it with a pin or other pointed object. The nozzle may be damaged.