Manual Mode
You can apply and release the parking brake manually.
- Pull the parking brake switch to apply the parking brake
The parking brake indicator light on the instrument cluster turns on, as does the light on the switch.In an emergency where the parking brake must be applied while the vehicle is moving, pull the parking brake switch and hold it.
- Press the parking brake switch to release the parking brake
Depress the brake pedal and, keeping it depressed, operate the parking brake switch. Check that the parking brake indicator light on the instrument cluster turns off, as does the light on the switch.Automatic release: Slowly depress the accelerator pedal. Check that the parking brake indicator light on the instrument cluster turns off, as does the light on the switch.
If the parking brake indicator light on the instrument cluster and the light on the switch flash, operate the switch again.

■ Using the parking brake
- When the engine start switch is not in the "ON" position (vehicles without a smart entry and start system) or in START mode (vehicles with a smart entry and start system), the parking brake cannot be released by operating the switch.
- When the engine start switch is not in the "ON" position (vehicles without a smart entry and start system) or in START mode (vehicles with a smart entry and start system), automatic mode (automatic application and release of the brake) is not available.
■ Automatic release function The parking brake is automatically released when you slowly depress the accelerator pedal.
The parking brake is automatically released under the following conditions:
- The driver's door is closed.
- The driver's seat belt is fastened.
- Move the shift lever to a forward or reverse drive position.
- The malfunction indicator light or the brake system warning light is not on.
If the automatic release function does not work, release the parking brake manually.
■ If the message "EPB used frequently. Wait for one minute." is displayed on the multi-information display If you apply and release the parking brake several times in a short period of time, the system may limit the number of operations to prevent overheating. If this happens, refrain from using the parking brake. Normal system operation resumes after approximately 1 minute.
■ If the message "EPB operation incomplete" or "EPB unavailable" is displayed on the multi-information display Operate the parking brake switch. If the message does not disappear after several operations of the switch, the system may be malfunctioning. Have the vehicle inspected as soon as possible by a Toyota dealer, a Toyota authorized repairer, or any reliable repairer.
■ Parking brake operating noise Operation of the parking brake produces an electric motor noise (whirring). This is not a sign of a malfunction.
■ Parking brake indicator light in the instrument cluster and switch indicator light
- Depending on the position/mode of the engine switch, the parking brake indicator light in the instrument cluster and the switch indicator light come on and stay on as described below:
- When you turn the engine switch off while the parking brake is applied, the parking brake indicator light in the instrument cluster and the switch indicator light stay on for approximately 15 seconds.
This is not a sign of a malfunction.
■ Mode change Vehicles with Multidrive: When you turn the automatic mode on/off, a message is displayed on the multi-information display and a buzzer sounds.
Vehicles with a manual transmission: When the automatic mode is turned off, the P-Auto Off indicator light comes on.
■ Parking the vehicle
■ Parking brake applied warning buzzer A buzzer sounds if you drive the vehicle with the parking brake applied. The message "EPB applied" is displayed on the multi-information display.
■ Warning buzzers and messages The system uses warning buzzers and messages to indicate a system malfunction or to alert the driver to the need for attention.
If a warning message is displayed on the multi-information display, read it and follow its instructions.
■ If the brake system warning light comes on
■ Winter operation
WARNING■ When parking the vehicle Do not leave a child alone in the vehicle. The parking brake could be released unintentionally, and there is a danger the vehicle could roll and cause a serious or fatal accident.
NOTE■ When parking the vehicle Before leaving the vehicle, shift the shift lever to P (Multidrive) or N (manual transmission), apply the parking brake, and make sure the vehicle is completely stopped.
■ When the system malfunctions Stop the vehicle in a safe place and check the warning messages.
■ If the parking brake remains applied due to a malfunction Driving with the parking brake applied causes abnormal overheating of the brake components, resulting in reduced braking performance and increased brake wear. If this occurs, have the vehicle inspected as soon as possible by a Toyota dealer, a Toyota authorized repairer, or any reliable repairer.