Exterior Panels / Trim

Installation

~1min read
0102030405064N·mlb·ft
Tightening torque found on this page

INSTALLATION

PROCEDURE

1. INSTALL REAR SPOILER ASSEMBLY

(a) Engage the clips to install the rear spoiler assembly, as shown in the illustration.

Install in this direction

(b) Install the 8 nuts.

Torque:

6 N·m {61 kgf·cm, 53 in·lbf}

(c) Connect the connector.

2. INSTALL NO. 2 BACK DOOR PANEL PROTECTOR

Click here

3. INSTALL NO. 1 BACK DOOR PANEL PROTECTOR

HINT:

Perform the same procedure as for the left side.

4. INSTALL BACK DOOR UPPER GARNISH ASSEMBLY

Click here