Seat Belt
Inspection
In this manual: Seat Belt
~1min read
INSPECTION
PROCEDURE
1. INSPECT REAR 3-POINT OUTER SEAT BELT ASSEMBLY
(a) Before installing the 3-point rear seat outer belt assembly, check the ELR. NOTICE: Do not disassemble the retractor. (1) When the retractor is tilted 15° or less, make sure the belt can be pulled out of the retractor. When the retractor is tilted more than 45°, make sure the belt locks. If the result is not as specified, replace the 3-point rear seat outer belt assembly. |
|
Was this page helpful?
