Seat Belt
Inspection
In this manual: Seat Belt
~1min read
INSPECTION
PROCEDURE
1. INSPECT FRONT SEAT BELT OUTER BELT ASSEMBLY
*a |
Retractor |
*b |
Unlock |
*c |
Lock |
*d |
45° |
(a) Before installing the front seat belt outer belt assembly, inspect the ELR.
NOTICE:
Do not disassemble the retractor.
(1) When the retractor is tilted 15° or less, make sure the belt can be pulled out of the retractor. When the retractor is tilted more than 45°, make sure the belt locks.
If the result is not as specified, replace the front seat belt outer belt assembly.
Was this page helpful?