Wiper / Washer

Inspection On Vehicle

~1min read

INSPECTION ON VEHICLE

PROCEDURE

1. INSPECT WIPER MOTOR ASSEMBLY

(a) for LH side:

(1) Operate the front wiper motor assembly.

*a

Alignment Mark

(2) Stop the front wiper motor assembly operation.

(3) Check the auto stop position (park position).

HINT:

After the front wiper motor stops, check the auto stop position after raising the wiper blade 2 times.

Standard clearance:

Area

Measurement

A

7.5 mm (0.295 in.)

OK:

The front wiper stops at the position shown in the illustration.

(b) for RH side:

(1) Operate the front wiper motor assembly.

*a

Alignment Mark

(2) Stop the front wiper motor assembly operation.

(3) Check the auto stop position (park position).

HINT:

After the front wiper motor stops, check the auto stop position after raising the wiper blade 2 times.

Standard clearance:

Area

Measurement

A

7.5 mm (0.295 in.)

OK:

The front wiper stops at the position shown in the illustration.