Heater & air conditioner

Blower assy

9steps
~54min
2/5difficulty
Done 0 of 9
COMPONENTS
OVERHAUL
OVERHAUL

HINT: COMPONENTS:

  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB−ASSY
  2. REMOVE HEATER TO FOOT DUCT No.1
  3. REMOVE BLOWER ASSY
  4. REMOVE CLEAN AIR FILTER
  5. REMOVE COWL WIRE No.2

a. Remove the clamp and cowl wire No. 2.

Remove cowl wire No.2 Remove cowl wire No.2 6. REMOVE RECIRCULATION DAMPER SERVO SUB−ASSY

a. Remove the 3 screws and recirculation damper servo sub−assy.

Remove recirculation damper servo sub-assy Remove recirculation damper servo sub-assy 7. REMOVE INSTRUMENT PANEL WIRE No.3
  1. Manual A/C model: Disconnect the connectors, remove the 3 clamps and instrument panel wire No. 3.
  2. Auto A/C model: Disconnect the connectors, remove the 2 clamps and instrument panel wire No. 3.
Remove instrument panel wire No.3 Remove instrument panel wire No.3 8. REMOVE BLOWER RESISTOR (MANUAL AIR CONDITIONING)

a. Remove the 2 screws and blower resistor.

Remove blower resistor (manual air conditioning) Remove blower resistor (manual air conditioning) 9. REMOVE BLOWER MOTOR CONTROL (AUTO AIR CONDITIONING)

a. Remove the 2 screws and blower motor control.

Remove blower motor control (auto air conditioning) Remove blower motor control (auto air conditioning) 10. REMOVE BLOWER W/FAN MOTOR SUB−ASSY

a. Remove the 3 screws and blower w/fan motor sub−assy.

Remove blower w/fan motor sub-assy Remove blower w/fan motor sub-assy
  1. INSTALL BLOWER ASSY
  2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB−ASSY

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.