Toyota RAV4 Quiz
Suspension

Rear upper control arm

In this manual: Suspension
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
4steps
~24min
2/5difficulty
Done 0 of 4
Components
Toyota RAV4. Rear upper control arm

Removal Hint:
  • Use the same procedures for the rh side and lh side.
  • The procedures listed below are for the lh side.
  1. Remove rear wheel
  2. Disconnect skid control sensor wire (for 2wd) (see page bc-198)
  3. Disconnect rear speed sensor lh (for 4wd) (see page bc-205)
  4. Remove rear upper control arm assembly lh
    Toyota RAV4. Remove rear upper control arm assembly lh

  1. Remove the 2 bolts and 2 nuts, and disconnect the upper control arm.
Toyota RAV4. Remove rear upper control arm assembly lh

Notice:

When removing the bolts, hold the nuts in place.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.