Reassembly

1. Install front oil pump oil seal

1. Using sst and a hammer, install a new oil seal to the pump.

The seal end should be flat with the outer edge of the oil pump.

1. 1
   Coat the lip of the oil seal with petroleum jelly.
2. 2
   Install front oil pump body o-ring

   

1. 1
   Coat the new o-ring with atf, and install it to the oil pump body.
2. 2
   Install front oil pump driven gear

   

1. 1
   Coat the front oil pump driven gear with atf, and install it to the oil pump body with the marked side facing up.
2. 2
   Install front oil pump drive gear

   

1. 1
   Coat the front oil pump drive gear with atf, and install it to the oil pump body with the marked side facing up.
2. 2
   Install stator shaft assembly

   

1. 1
   Set the stator shaft by aligning each bolt hole.
2. 2
   Using a t30 ''trox'' socket, install the 11 bolts.

6. Install clutch drum oil seal ring

1. Install the 2 clutch drum oil seal rings.

Do not expand the ring ends excessively.

7. Inspect oil pump assembly (see page ax-218)