Installation

(a) Install the actuator bracket with the 3 bolts in the sequence shown in the illustration.

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

(a) Install the brake actuator with bracket with the 3 nuts in the sequence shown in the illustration.

Torque:

19 N·m {194 kgf·cm, 14 ft·lbf}

NOTICE:

• Be careful not to damage the brake tubes and wire harness.

(b) Temporarily install each brake tube in the correct positions of the brake actuator as shown in the illustration.

(c) Using a union nut wrench, install the 6 brake tubes to the brake actuator.

(1) for 12 mm flare nuts :

Torque:

Specified tightening torque :

20 N·m {199 kgf·cm, 14 ft·lbf}

HINT:

• Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

  Click here

• When using a union nut wrench (fulcrum length of 20 mm (0.787 in.)) + torque wrench (fulcrum length of 300 mm (11.8 in.)): 18 N*m (187 kgf*cm, 13 ft.*lbf)

(2) for 10 mm flare nuts :

Torque:

Specified tightening torque :

15 N·m {155 kgf·cm, 11 ft·lbf}

HINT:

• Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

  Click here

• When using a union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of 300 mm (11.8 in.)): 14 N*m (145 kgf*cm, 10 ft.*lbf)