Removal

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.

Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

3. DRAIN BRAKE FLUID

NOTICE:

Immediately wash off any brake fluid that comes into contact with any painted surfaces.

4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (for 2TR-FE)

Click here

5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY (for 2TR-FE)

6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 2TR-FE)

Click here

7. REMOVE BRAKE ACTUATOR ASSEMBLY

(a) Release the connector lock lever.

(b) Disconnect the brake actuator connector.

(c) Using a union nut wrench, separate the 6 brake tubes from the brake actuator.

(d) Use tags or labels to identify the place to reconnect each brake tube. Text in Illustration *a RR LH *b RR RH *c FR LH *d FR RH *e RR Master Cylinder *f FR Master Cylinder

(e) Remove the 3 nuts and brake actuator with bracket.

8. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY

(a) Remove the 3 bolts and actuator bracket.