CUSTOMIZE PARAMETERS
PROCEDURE
1. CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
(a) Customizing with the Techstream.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Seat.
(5) Select the setting by referring to the table below.
Tester Display | Default | Content | Setting | Relevant ECU |
Seat Travel Distance |
Normal |
Allows customizing of the seat movement distance for the power easy access system. |
OFF or Short or Normal |
Main body ECU (driver side junction block assembly) |
(b) Customizing with the Multi-display
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(1) Turn the ignition switch to ON.
(2) Enter the following menus: SET UP / Vehicle / Vehicle Customization / Other vehicle settings.
(3) Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
Driver's Seat Easy Exit |
Full |
Allows customization of the seat movement distance for the power easy access system. |
Full or Partial or Off |
Main body ECU (driver side junction block assembly) |
|