Use the following procedures to troubleshoot the front power seat control system.
*: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
NEXT
CUSTOMER PROBLEM ANALYSIS
In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
The following 5 items are important points in the problem analysis:
What
Vehicle model, system name
When
Date, time, occurrence frequency
Where
Road conditions
Under what conditions?
Driving conditions, weather conditions
How did it happen?
Problem symptoms
NEXT
INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT
CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
(a) Use the Techstream to check if the CAN communication system is functioning normally.
Click here
Result
Proceed to
CAN DTC is not output
A
CAN DTC is output
B
B
GO TO CAN COMMUNICATION SYSTEM
A
CHECK FOR DTC*
(a) Check for DTCs and note any codes that are output.
Click here
(b) Clear the DTCs.
Click here
(c) Check for DTCs.
Click here
Result
Proceed to
DTCs are not output
A
DTCs are output
B
B
GO TO DIAGNOSTIC TROUBLE CODE CHART
A
PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table.
Click here
Result
Proceed to
Fault is not listed in problem symptoms table
A
Fault is listed in problem symptoms table
B
B
ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE