1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
20 °C
6.9 to 7.9 Ω
If the result is not as specified, replace the camshaft timing oil control valve assembly.
(b) Connect the battery's positive (+) lead to terminal 1 and the negative (-) lead to terminal 2, and check the movement of the valve.
OK:
Condition
Specified Condition
Battery positive (+) voltage is applied
Valve moves in left arrow direction shown in the illustration
Battery positive (+) voltage is cut off
Valve moves in right arrow direction shown in the illustration
If the result is not as specified, replace the camshaft timing oil control valve assembly. If the valve cannot return properly because of foreign matter, a small pressure leak in the advanced direction may occur and a DTC may be output.