Engine, Hybrid System

On-vehicle Inspection

~1min read

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT AIR FUEL RATIO SENSOR

(a) Disconnect the 2 air fuel ratio sensor connectors.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (HA1A) - 2 (+B)

(for Bank 1)

20 °C

1.6 to 3.2 Ω

1 (HA2A) - 2 (+B)

(for Bank 2)

Text in Illustration

*A

for Bank 1

*B

for Bank 2

*a

Component without harness connected

(Air Fuel Ratio Sensor)

If the result is not as specified, replace the air fuel ratio sensor.

(c) Connect the 2 air fuel ratio sensor connectors.