Engine, Hybrid System

Removal

~1min read
1special tools

REMOVAL

CAUTION:

  • The procedures should be performed by at least 2 people.
  • Wear protective gloves when removing the exhaust pipe assembly.
  • The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
  • Confirm that the exhaust pipe assembly has cooled down before removing it.

PROCEDURE

1. REMOVE PROPELLER SHAFT HEAT INSULATOR

2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

(a) Disconnect the heated oxygen sensor connector.

(b) Using SST, remove the heated oxygen sensor.

SST: 09224-00010

3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

(a) Detach the 2 clamps and disconnect the heated oxygen sensor connector.

(b) Using SST, remove the heated oxygen sensor.

SST: 09224-00010