Actuator Check
1. ACTUATOR CHECK
(a) Start the engine and warm it up.
(b) Perform the indicator check (See page .gif)
).
(c) Press the "Recirculation/Fresh" switch to perform the actuator check.
HINT:
Be sure to perform the actuator check after starting the engine.
Text in Illustration*1 |
Air Conditioning Control Assembly |
(d) As the actuator check is repeated from steps 1 to 10 at 1 second intervals, check the temperature and air flow visually and by hand.
.png)
HINT:
- The display blinks at 1 second intervals in the step operation.
- Press the "OFF" switch to finish panel diagnosis.
- Press the "AUTO" switch to enter sensor check mode.
*1 |
Accessory Meter Assembly (TFT) |
*2 |
Accessory Meter Assembly (LCD) |
*3 |
Display Code |
Step No. | Display Code | Condition |
||||
|---|---|---|---|---|---|---|
Blower Level | Air Mix Damper | Airflow Vent | Air Inlet Damper | Compressor |
||
1 |
0 |
0 |
0% open |
FACE |
FRESH |
off |
2 |
1 |
1 |
0% open |
FACE |
FRESH |
off |
3 |
2 |
17 |
0% open |
FACE |
RECIRCULATION/FRESH |
on |
4 |
3 |
17 |
0% open |
FACE |
RECIRCULATION |
on |
5 |
4 |
17 |
50% open |
B/L |
RECIRCULATION |
on |
6 |
5 |
17 |
50% open |
B/L |
RECIRCULATION |
on |
7 |
6 |
17 |
50% open |
FOOT |
FRESH |
on |
8 |
7 |
17 |
100% open |
FOOT-0 |
FRESH |
on |
9 |
8 |
17 |
100% open |
F/D |
FRESH |
on |
10 |
9 |
31 |
100% open |
DEF |
FRESH |
on |
(e) If the steps are difficult to read because they change automatically, press the "MODE" switch to display the steps one at a time so that they can be read easily. The items are displayed step by step each time the "MODE" switch is pressed.
HINT:
- Press the "OFF" switch to finish panel diagnosis.
- Press the "Recirculation/Fresh" switch to enter sensor check mode.
*1 |
Air Conditioning Control Assembly |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.