Theft Deterrent / Keyless Entry
Customize Parameters
In this manual: Theft Deterrent / Keyless Entry
~2min read
CUSTOMIZE PARAMETERS
HINT:
The following items can be customized.
NOTICE:
- After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
- Be sure to record the current settings before customization.
- When troubleshooting, make sure that the item in question is not set to OFF as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to OFF, then perform troubleshooting).
1. CUSTOMIZE
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting /
(e) Select the setting by referring to the table below.
SecurityDisplay (Item) | Default | Content | Setting |
|---|---|---|---|
Warning by Horn |
ON |
Function that allows the vehicle horn and theft deterrent horn to be used as warning devices. |
ON or OFF |
Passive Mode (Security System) |
OFF |
|
ON or OFF |
Entry Delay |
14 s |
Function that changes entry delay time (time before warning starts) for Passive Mode |
0 s, 14 s or 30 s |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?