Theft Deterrent / Keyless Entry
How To Proceed With Troubleshooting
In this manual: Theft Deterrent / Keyless Entry
~1min read
CAUTION / NOTICE / HINT
HINT:
- Use this procedure to troubleshoot the theft deterrent system.
- *: Use the Techstream.
VEHICLE BROUGHT TO WORKSHOP
|
CUSTOMER PROBLEM ANALYSIS
(a) Interview the customer to confirm the trouble (See page
).
|
SYMPTOM SIMULATION
|
PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table (See page
).
Result | Proceed to |
|---|---|
Fault is not listed in Problem Symptoms Table |
A |
Fault is listed in Problem Symptoms Table |
B |
| B | ![]() | GO TO STEP 6 |
|
PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM*
(a) System Description (See page
)
(b) Terminals of ECU (See page
)
(c) Data List / Active Test (See page
)
|
ADJUST, REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | ![]() | END |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.gif)
.gif)