Toyota Venza Quiz
Theft Deterrent / Keyless Entry

On-vehicle Inspection

In this manual: Theft Deterrent / Keyless Entry
Introduction — 15Maintenance — 8Audio / Video — 102Garage Door Opener — 8Navigation / Multi Info Display — 81Park Assist / Monitoring — 50Brake (front) — 7Brake (rear) — 7Brake Control / Dynamic Control Systems — 79Brake System (other) — 28Parking Brake — 22Axle And Differential — 44Drive Shaft / Propeller Shaft — 24Mf1a Transfer / 4wd / Awd — 46U660e Automatic Transmission / Transaxle — 1241ar-fe Cooling — 311ar-fe Emission Control — 101ar-fe Engine Control — 1331ar-fe Engine Mechanical — 441ar-fe Fuel — 311ar-fe Intake / Exhaust — 211ar-fe Lubrication — 111ar-fe Starting — 16Cruise Control — 241ar-fe Battery / Charging — 162gr-fe Battery / Charging — 17Networking — 67Power Distribution — 8Power Assist Systems — 34Steering Column — 37Steering Gear / Linkage — 29Alignment / Handling Diagnosis — 4Front Suspension — 39Rear Suspension — 35Tire / Wheel — 4Tire Pressure Monitoring — 35Door / Hatch — 83Exterior Panels / Trim — 56Horn — 4Lighting (ext) — 89Mirror (ext) — 36Sliding Roof / Convertible — 26Window / Glass — 87Wiper / Washer — 30Door Lock — 85Heating / Air Conditioning — 82Interior Panels / Trim — 20Lighting (int) — 37Meter / Gauge / Display — 41Mirror (int) — 9Power Outlets (int) — 10Seat — 84Seat Belt — 43Supplemental Restraint Systems — 131Theft Deterrent / Keyless Entry — 155
~2min read
ON-VEHICLE INSPECTION PROCEDURE

1. CHECK POWER SOURCE MODE CHANGE FUNCTION

(a) Check the function of the engine switch.

(1) Check that power source mode changes in accordance with the conditions of the shift position and brake pedal.

Brake Pedal

Shift Lever

Power Source Mode Pattern

Depressed

P or N

When the engine switch is pushed once.

  • off → engine start

Not depressed

P

Each time the engine switch is pushed.

  • off → on (ACC) → on (IG) → off

Except P

Each time the engine switch is pushed.

  • off → on (ACC) → on (IG) → on (ACC)

-

P

When the engine switch is pushed in the on (IG) condition (engine running).

  • on (IG) → off

-

Except P

When the engine switch is pushed in the on (IG) condition (engine running).

  • on (IG) → on (ACC)

(b) Check that the power source mode changes without pressing the engine switch.

(1) With power source mode on (ACC) and the shift lever in P, wait for at least 1 hour. Check that the power source mode changes from on (ACC) to off automatically.

2. CHECK INDICATOR CONDITION


(a) Check the indicator light on the engine switch.

(1) Check that the engine switch indicator turns on and changes color according to the table below.

Power Source Mode/Condition

Indicator Light Condition

Brake Pedal Released

Brake Pedal Depressed, Shift Lever in P or N

off

off

Turns on (Green)

on (ACC, IG)

Turns on (Amber)

Turns on (Green)

Engine running

off

off

Steering lock not unlocked

Flashes (Green) for 30 sec.

Flashes (Green) for 30 sec.

System malfunction

Flashes (Amber) for 15 sec.

Flashes (Amber) for 15 sec.

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.