Removal

1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

(See page )

2. REMOVE COOL AIR INTAKE DUCT SEAL

3. REMOVE INLET NO. 2 AIR CLEANER

4. REMOVE AIR CLEANER CAP WITH HOSE

5. REMOVE AIR CLEANER CASE

6. REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY

7. SEPARATE MANIFOLD STAY

8. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

9. REMOVE EXHAUST MANIFOLD TO HEAD GASKET

10. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

(a) Remove the 3 nuts and front No. 1 floor heat insulator.

11. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.

(b) Remove the nut and transmission control cable assembly from the transmission control shaft lever.

(c) Disconnect the transmission control cable assembly from the No. 2 transmission control cable bracket.

(d) Turn back the carpet.

(e) Remove the 2 bolts and pull out the transmission control cable assembly from the body.