Volkswagen Golf Quiz
Running gear, axles, steering

Setting vehicle to initial position for wheel alignment

In this manual: Running gear, axles, steering
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
If measured values are outside specified tolerances, this may be because the vehicle is inclined. Right-hand drive vehicles or e.g. vehicles with an automatic gearbox may lean to one side slightly. This is due to the installation position of the assemblies and their associated weight transfer and is normal.
  • In such cases it is essential to measure dimension -a- at the rear on both sides.
  • Correct any differences as required.
On the front axle, compensate by adding weights to the top of the respective suspension turret. On the rear axle, compensate by adding weights to the respective side of the luggage compartment.

Sand-filled sacks (weighing approx. 10 kg) are suitable for this.
Setting vehicle to initial position for wheel alignment

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.