Volkswagen Golf Quiz
Running gear, axles, steering

Specified values for wheel alignment, torsion beam axle, Golf

In this manual: Running gear, axles, steering
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
4steps
~24min
2/5difficulty
Done 0 of 4

These specifications apply to all engines.

Explanations regarding PR numbers → Chapter „Vehicle data sticker“.

Front axle Basic running gear Sports running gear Raised running gear DCC running gear
PR numbers G01+2UA G02+2UA G07+2UA G18/G22 G01+2UC+GM1 G01+2UP G02+2UC+GM1 G07+2UC G21/G26 G01+2UF G02+2UF G24/G25/G27 G03+2UQ G03+2UH
Total toe (unladen) 10′ ± 10′ 10′ ± 10′ 10′ ± 10′ 10′ ± 1 0′
Camber (in straight-ahead position) → Remark -30′ ± 30′ -41′ ± 30′ -16′ ± 30′ -36′ ± 30′
Maximum permissible difference between sides max. 30' max. 30' max. 30' max. 30'
Toe-out on turns with 20° steering angle → Remark 1° 19′ ± 20′ 1° 30′ ± 20′ 1° 09′ ± 20′ 1° 26′ ± 20′
Caster 7° 23′ ± 30′ 7° 38′ ± 30′ 7° 09′ ± 30′ 7° 33′ ± 30′
Maximum permissible difference between sides max. 30' max. 30' max. 30' max. 30'
Ride height 383 ± 10 mm 368 ± 10 mm 398 ± 10 mm 373 ± 10 mm
  1. Camber cannot be adjusted. Corrections are possible by moving the subframe slightly.
  2. The toe-out on turns can be displayed as a negative value on the wheel alignment computer, depending on the manufacturer.

These specifications apply to all engines.

Explanations regarding PR numbers → Chapter „Vehicle data sticker“.

Front axle BlueMotion
PR numbers G01+2UC+GM1 G01+2UP G02+2UC+GM1 G07+2UC G21/G26
Total toe (unladen) 10′ ± 10′
Camber (in straight-ahead position) → Remark -41′ ± 30′
Maximum permissible difference between sides max. 30'
Toe-out on turns with 20° steering angle → Remark 1° 30′ ± 20′
Caster 7° 38′ ± 30′
Maximum permissible difference between sides max. 30'
Ride height 368 ± 10 mm
  1. Camber cannot be adjusted. Corrections are possible by moving the subframe slightly.
  2. The toe-out on turns can be displayed as a negative value on the wheel alignment computer, depending on the manufacturer.
Rear axle Standard running gear Sports running gear Raised running gear DCC running gear
Camber -1° ± 10′ -1° ± 10′ -1° ± 10′ -1° ± 10′
Maximum permissible difference between sides max. 30' max. 30' max. 30' max. 30'
Total track (at prescribed camber) 20′ ± 12′ 24′ ± 12′ 26′ ± 12′ 23′ ± 12′
Max. permissible deviation from direction of travel max. 20' max. 20' max. 20' max. 20'
Ride height 385 ± 10 mm 370 ± 10 mm 400± 10 mm 375 ± 10 mm
Rear axle BlueMotion
Camber -1° ± 10′
Maximum permissible difference between sides max. 30'
Total track (at prescribed camber) 24′ ± 12′
Max. permissible deviation from direction of travel max. 20'
Ride height 370 ± 10 mm

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.