Running gear, axles, steering

Adjusting toe on rear axle, multi-link suspension

~1min read

Special tools and workshop equipment required

Torque wrench -V.A.G 1332-

Adjusting toe on rear axle, multi-link suspension
  • Loosen nut -1-.
  • Turn eccentric bolt -2- until specification is attained.
Note

The maximum adjustment range is 90° to the left or right of centre.

  • Tighten nut -1-.
  • Check toe value again after tightening nut -A- → Chapter „Specified values for wheel alignment“.

Specified torques

→ Chapter „Assembly overview - transverse link“

Adjusting toe on rear axle, multi-link suspension

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.