Volkswagen Golf Quiz
Steering

Ignition Lock

In this manual: Steering
General Information — 9Engine — 14Engine Disassembly and Assembly, 1.1 and 1.3 l Engines — 15Engine Disassembly and Assembly, 1.6 and 1.8 L Engines — 13Diesel Engine Disassembly and Assembly — 16Fuel System — 1Carburetor Engine Fuel System — 19Fuel injection system — 17Diesel Engine Fuel System — 15Clutch — 12Transmission — 37Transmission — 8Front-wheel drive — 5Steering — 12Front Suspension — 9Rear Suspension — 4Brake System — 16Body — 26Electrical System — 42Wiring Diagrams — 24
~1min read

Removal PROCEDURE 1. Remove the steering column (see subsection 8.5).

2. Unscrew bolt 16 (see figure Steering Columns). 3. Remove contact group 15 from ignition lock housing 14. 4. Drill a 3 mm hole in housing 14 at the location shown in figure Steering Columns, item I, to remove cylinder 12 from ignition lock housing 14. 5. Using wire, push the spring-loaded detent through the drilled hole and remove ignition lock cylinder 12. Installation Install the ignition lock in the reverse order of removal, observing the instructions in subsection 8.4.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.