Traffic hazard alert

Fig. 1 A traffic hazard alert due to temporary or moving roadworks (general example).
The traffic hazard alert system in the Volkswagen ID.4 uses active V2X communication to warn the driver of nearby hazards in real time.
This feature can help prevent accidents and contribute to smoother traffic flow.
Depending on the detected hazard, vehicle speed, and deceleration, the Volkswagen ID.4 provides warnings in various forms:
- Audible warning signals.
- Visual symbols.
- Messages in the instrument cluster and, if equipped, in the head-up display.
WARNING
Ignoring traffic hazard alerts in the Volkswagen ID.4 can lead to dangerous situations, including serious or fatal accidents.
- Always respond promptly to warnings and alerts.
Red symbols
Red symbols in the Volkswagen ID.4 indicate immediate hazards in close proximity.
Accident site ahead.
Emergency vehicle in action.
Traffic jam ahead.
Intervention by an assistance system in a vehicle driving ahead, e.g. Autonomous Emergency Braking (Front Assist).
Yellow symbols
Yellow symbols indicate detected hazards that may require attention in the Volkswagen ID.4.
Accident site ahead.
Emergency vehicle in action.
Traffic jam ahead.
Stationary object or breakdown ahead.
Construction site ahead.
Hide traffic hazard alert displayed
1. Press OK on the multi-function steering wheel of the Volkswagen ID.4 to dismiss the alert.
Troubleshooting
V2X deactivates automatically
- V2X functionality is not permitted in the current country.
- The Volkswagen ID.4 remained offline for an extended period, preventing certificate updates.
Adjust privacy settings to restore connectivity and enable certificate updates.
- System malfunction.
Contact an authorized Volkswagen service partner for assistance.
No V2X data is being displayed
- The V2X function in the Volkswagen ID.4 is temporarily restricted.
- No nearby participants are transmitting relevant data.
- Available data is not applicable to the current driving situation.
- V2X antennas are obstructed by accessories or coverings.
Ensure antenna areas remain unobstructed.
- Weather conditions limit data transmission.
- The driver has already responded to the detected hazard.
Introduction
External devices can be connected to the Volkswagen ID.4 Infotainment system via wired or wireless interfaces, depending on equipment and regional specifications.
The number and type of connections in the Volkswagen ID.4 may vary based on configuration and optional features.
For wired connections, always use original or manufacturer-approved cables supplied with the device or vehicle.
If a connector does not fit properly, verify its orientation and compatibility before applying force.
NOTICE
Using unsuitable or damaged cables in the Volkswagen ID.4 may lead to device malfunctions or damage.
- Only use compatible and undamaged cables.
- Insert connectors carefully without excessive force.
- Avoid bending or pinching cables sharply.
If a connected device is not recognized in the Volkswagen ID.4, disconnect all devices and reconnect them one by one.
Check the functionality of the cable if necessary.
If issues persist, restart the connected device, as this may resolve temporary errors.
Using proper connections and maintaining V2X awareness ensures safer and more efficient driving in the Volkswagen ID.4.