La funzione di sblocco porte con accensione OFF (IGN OFF Interlock) non funziona
Procedura di diagnosi
1.CONTROLLARE L'IMPOSTAZIONE DI SELEZIONE BLOCCO/SBLOCCO AUTOMATICO IN WORK SUPPORT
- Selezionare DOOR LOCK del BCM con CONSULT.
- Selezionare AUTOMATIC LOCK/UNLOCK SELECT in modalità WORK SUPPORT.
- Verificare l'impostazione AUTOMATIC LOCK/UNLOCK SELECT in WORK SUPPORT.
Consultare BCS "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)" (BLOCCO PORTE: Funzione CONSULT (BCM - BLOCCO PORTE)).
Il risultato dell'ispezione è normale?
SÌ >> VAI AL PUNTO 2.
NO >> Impostare Unlock Only o Lock/Unlock in AUTOMATIC LOCK/UNLOCK SELECT.
2.CONTROLLARE L'IMPOSTAZIONE DI SELEZIONE SBLOCCO AUTOMATICO DELLE PORTE IN WORK SUPPORT
- Selezionare DOOR LOCK del BCM con CONSULT.
- Selezionare AUTOMATIC DOOR UNLOCK SELECT in modalità WORK SUPPORT.
- Verificare l'impostazione AUTOMATIC DOOR UNLOCK SELECT in WORK SUPPORT.
Consultare BCS "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)" (BLOCCO PORTE: Funzione CONSULT (BCM - BLOCCO PORTE)).
Il risultato dell'ispezione è normale?
SÌ >> PASSARE AL PUNTO 3.
NO >> Impostare MODE 1 o MODE 3 in AUTOMATIC DOOR UNLOCK SELECT.
3.SOSTITUIRE BCM
- Sostituire il BCM. Consultare BCS "Removal and Installation" (Rimozione e installazione).
- Confermare il funzionamento dopo la sostituzione.
Il risultato è normale?
SÌ >> Fine ispezione.
NO >> Controllare l'anomalia intermittente. Fare riferimento a GI "Anomalia intermittente".