RADIO RECEIVER

The following recommendations must be observed:

- Select a radio receiver suitable for this model, with a set of mounting parts, antenna and interference suppression device. Installation instructions must be included. - For stable reception and normal operation, do not use parts from a previous model or from other radio receivers.

- When installing, make sure the antenna cable, connecting wires and speaker cables are routed neatly through the grommets, do not chafe, and do not contact control mechanisms (for example pedals, steering column, heater controls, etc.).

- When replacing the factory radio receiver with another, note the following: the multi-pin wiring harness connector fits all Audi radio receiver versions that have an additional socket for dial illumination.