Installing the bulb holder

Installing the bulb holder is straightforward.

Fig. 278 The retainer for the bulb holder has a guide pin.

• Place the bulb holder in the tail light and align it.
• Press the bulb holder into the tail light until it clicks into place.
• Position the retainer => Fig. 278 (A).
• When tightening, make sure the guide pin (B) is located in the recess of the retainer.
• Clip the cover onto the interior trim.
• Store the screwdriver in the on-board tool kit.
• Make sure all bulbs light up at the rear of the vehicle.