Body

Catch, Removing and Installing

~1min read
0102030405054N·mlb·ft
Tightening torque found on this page

Hood Hook, Removing and Installing

Removing

- Remove the nuts -1- and the hood catch -2-.

Installing

Install in reverse order of removal.

A55-10701

Lock Carrier Hook, Removing and Installing

Removing

- Remove the lock carrier cover.

- Remove the bolts -1- and then remove the hood catch -2- from the lock carrier -3-.

- Tighten the bolts to 5 N·m.

Installing

Install in reverse order of removal.

A55-10710

Catch, Removing and Installing

Catch, Removing and Installing

1 - Nut

  • Tightening specification. Refer to → Chapter "Overview - Hood".

2 - Catch

  • Removing
    • Remove the bolts and the hood catch.
  • Installing
    • Align the hood catch with the markings on the hood -arrows- and then tighten the bolts.

3 - Hood