Body
Hood, Adjusting
In this manual: Body
~1min read
Special tools and workshop equipment required
- Gauge - Gap Adjustment -3371-
Gap Dimensions for Hood

Note
All dimensions are in mm with a +- 0.5 mm tolerance.
- Dimension -A- = 4.5 mm
- Dimension -B- = 4.5 mm
- Dimension -C- = 4.5 mm
- Dimension -D- = 3.0 mm
Height Adjustment Stop Buffer

1 - Stop Buffer
- The stop buffer -1- also works as a strike guard.
2 - Hood
3 - Adjusting Buffer
Note
The adjusting buffers -2- are used to adjust the height of the hood.
- The adjusting buffer -2- must lightly contact the lock carrier when the hood is closed.
Was this page helpful?