BMW 1 Quiz
Engine

Removal and Installation of Engine Undershield

In this manual: Engine
Introduction — 10Owner's Manual — 29Routine Care and Maintenance — 30Engine — 18Cooling and Heating Systems — 13Fuel and Exhaust Systems — 29Engine Electrical Equipment — 20Manual Transmission — 4Automatic Transmission — 4Clutch and Drive Shafts — 12Brake System — 19Suspension and Steering — 22Body — 36Body Electrical Equipment — 34Electrical Circuit Diagrams — 30On-board diagnostic system — 5
~1min read

REMOVAL
1. Raise and support the vehicle on stands.
2. Turn the retainers (arrows in the accompanying illustration) securing the rear part of the undershield (under the oil pan) 1/4 turn with a screwdriver and remove the undershield.

3. Отверните болты крепления передней части щитка (позади бампера) (стрелки

3. Remove the bolts securing the front part of the undershield (behind the bumper) (arrows in the accompanying illustration) to the bumper and remove it.

УСТАНОВКА

INSTALLATION
1. Install the front part of the undershield first, then the rear part, and secure with bolts.
2. Lower the vehicle onto its wheels.

Test yourself

A quick BMW 1 quiz: every answer comes with an explanation and a link to the manual page.