BMW 1 Quiz
Suspension and Steering

Power Steering Pump Mounting

In this manual: Suspension and Steering
Introduction — 10Owner's Manual — 29Routine Care and Maintenance — 30Engine — 18Cooling and Heating Systems — 13Fuel and Exhaust Systems — 29Engine Electrical Equipment — 20Manual Transmission — 4Automatic Transmission — 4Clutch and Drive Shafts — 12Brake System — 19Suspension and Steering — 22Body — 36Body Electrical Equipment — 34Electrical Circuit Diagrams — 30On-board diagnostic system — 5
~1min read
010203040502015N·mlb·ft
Tightening torque found on this page

Крепление гидронасоса
Power Steering Pump Mounting
1 — power steering pump
2 — oil cooler
3 — return line
4 — steering gear
5 — pressure line
6 — hollow bolt
7 — reservoir
8 — suction hose
D — O-ring

Крепление гидронасоса представлено на сопроводительной иллюстрации.
Power steering pump mounting is shown in the accompanying illustration.
1 — pulley
2 — bracket
3 — power steering pump
4 — bolt M8 x 95
5 — bolt M8 x 65

* When separating the bracket from the cylinder block, note the position and record the number of spacers so they can be reinstalled in the same place. Tighten torque 20 N·m.

Test yourself

A quick BMW 1 quiz: every answer comes with an explanation and a link to the manual page.