Temporary puncture repair kit

In this manual: Temporary puncture repair kit
Presentation — 1Hybrid system — 1Electric drive system — 1Labels — 1Eco-driving — 1Vehicle data recording and privacy — 1Digital instrument panel — 1Head-up display — 1Warning and indicator lamps — 1Indicators — 1Manual test — 1Lighting dimmer — 1Trip computer — 15-inch touch screen — 110-inch touch screen — 1My shortcuts — 1Electronic key with remote control function and built-in key — 1Proximity Keyless Entry and Start — 1Central locking — 1Back-up procedures — 1Doors — 1Alarm — 1Electric windows — 1Sunroof — 1Correct driving position — 1Front head restraints — 1Front seats — 1Steering wheel adjustment — 1Mirrors — 1Rear bench seat — 1Heating and Ventilation — 1Manual air conditioning — 1Dual-zone automatic air conditioning - With MyCitroën Play — 1Dual-zone automatic air conditioning - With MyCitroën Drive Plus — 1Interior air recirculation — 1Heated windscreen — 1Temperature preconditioning (Electric) — 1Interior fittings — 1Courtesy lamps — 1Boot fittings — 1Exterior lighting control stalk — 1Direction indicators — 1Automatic illumination of lamps — 1Guide-me-home and welcome lighting — 1Automatic lighting systems - General recommendations — 1Automatic headlamp dipping — 1Cornering lighting — 1Wiper control stalk — 1General safety recommendations — 1Hazard warning lamps — 1Emergency or assistance call — 1Event Data Recording system — 1Electronic stability control (ESC) — 1Seat belts — 1Airbags — 1Child seats — 1Manual child lock — 1Driving recommendations — 1Starting / Switching off the engine with the key — 1Starting/Switching off the engine with Keyless Entry and Start — 1Starting/Switching off the electric motor — 1Electric parking brake — 16-speed manual gearbox — 1Automatic gearbox — 1Automatic gearbox (Hybrid) — 1Drive selector (Electric) — 1Driving modes — 1Hill start assist — 1Gear shift indicator — 1Stop & Start (Petrol or Diesel) — 1e-Auto mode (Hybrid) — 1Tyre under-inflation detection — 1Driving and manoeuvring aids - General recommendations — 1Shortcuts for driving aids — 1Road signs recognition — 1Speed limiter — 1Cruise control - Specific recommendations — 1Cruise control — 1Highway Driver Assist — 1Adaptive cruise control — 1Lane positioning assist — 1Lane keeping assist — 1Blind spot monitoring — 1Active Safety Brake with Collision Risk Alert and Intelligent emergency braking assistance — 1Distraction detection — 1Parking sensors — 1Reversing camera — 1Top Rear Vision - 360 Vision — 1Compatibility of fuels — 1Refuelling — 1Electrified vehicles - General recommendations — 1Hybrid system — 1Charging system (Electric) — 1Charging the traction battery (Electric) — 1Towing device — 1Towing device with quickly detachable towball — 1Roof bars — 1Snow chains — 1Energy economy mode — 1Bonnet — 1Engine compartment — 1Checking levels — 1Checks — 1AdBlue (BlueHDi) — 1Free-wheeling — 1Advice on care and maintenance — 1Warning triangle — 1Tool kit — 1Temporary puncture repair kit — 1Spare wheel — 1Changing a bulb — 112 V battery / Accessory battery — 1Towing the vehicle — 1Engine technical data and towed loads — 1Identification markings — 1Menus — 1Radio — 1DAB (Digital Audio Broadcasting) radio — 1Media — 1Telephone — 1Settings — 1Frequently asked questions — 1First steps — 1Steering-mounted controls — 1Menus — 1Radio — 1DAB (Digital Audio Broadcasting) radio — 1Media — 1Telephone — 1Applications — 1Settings — 1Frequently asked questions — 1First steps — 1Personalisation — 1Steering-mounted controls — 1Applications — 1Voice commands — 1Navigation — 1Connectivity — 1Mirror Screen — 1Media — 1Phone — 1Settings — 1Help — 1General Information — 1
~5min read

Made up of a compressor and a sealant cartridge, it allows you to carry out a temporary repair of the tyre so that you can drive to the nearest garage.

It is designed to repair most punctures located on the tyre tread.

The vehicle's electric system allows the connection of the compressor to the 12 V power supply for long enough to repair a tyre after a puncture.

For more information on the Tool kit, refer to the corresponding section.

Tyre inflation pressures are indicated on this label.

For more information on Identification markings, particularly this label, refer to the corresponding section.

Citroen C4. Temporary puncture repair kit

Should the pressure of one or more tyres be adjusted, it is necessary to reinitialise the under-inflation detection system.

For more information on Tyre under-inflation detection, refer to the corresponding section.

Repair procedure

Do not remove any foreign body (e.g. nail, screw) which has penetrated the tyre.

► Park the vehicle without obstructing traffic and apply the parking brake.

► Follow the safety instructions (hazard warning lamps, warning triangle, high visibility jacket, etc.) according to the legislation in force in the country in which you are driving.

► Switch the ignition off.

Citroen C4. Temporary puncture repair kit

► Remove the transparent cap from the bottle of sealant.

► Lift the protective cover before installing the bottle of sealant on the compressor.

► Turn the bottle of sealant over and screw it a quarter turn into the compressor.

► Remove the valve cap from the tyre to be repaired, and place it in a clean place.

Citroen C4. Temporary puncture repair kit

► Uncoil the pipe stowed under the compressor.

► Connect the pipe from the compressor to the valve of the tyre to be repaired and tighten firmly.

► Check that the compressor switch is in position "O".

► Fully uncoil the electric cable stowed under the compressor.

► Connect the compressor's electric plug to the vehicle's 12 V socket.

► Affix the speed limit sticker.

The speed limit sticker must be affixed inside the vehicle in the area close to the driver, to remind them that a wheel is in temporary use.

► Switch the ignition on.

Citroen C4. Temporary puncture repair kit

► Switch on the compressor by moving the switch to position "I" until the tyre pressure reaches 2 bar. The sealant product is injected under pressure into the tyre; do not disconnect the pipe from the valve during this operation (risk of blowback).

If after approximately 7 minutes, the pressure of 2 bar is not reached, this indicates that the tyre is not repairable; contact a CITROËN dealer or a qualified workshop for assistance.

► Move the switch to position "O".

► Disconnect the compressor's electric plug from the vehicle's 12 V socket.

► Remove the kit.

► Refit the cap on the valve.

► Remove and store the bottle of sealant.

The sealant product is harmful if swallowed and causes irritation to the eyes.

Keep this product out of the reach of children.

The use-by date of the fluid is marked on the bottle.

After use, do not discard the bottle into the environment; take it to a CITROËN dealer or an authorised waste disposal site.

Do not forget to obtain a new bottle of sealant, available from a CITROËN dealer or a qualified workshop.

Citroen C4. Temporary puncture repair kit

► Drive immediately for approximately 3 miles (5 kilometres) at reduced speed (between 12 and 60 km/h ) to plug the puncture.

► Stop to check the repair and the tyre pressure using the kit:

  • If the tyre pressure is incorrect, contact a CITROËN dealer to have the tyre changed.
  • If the tyre pressure is correct, drive a second time for approximately 3 miles (5 kilometres) at reduced speed (between 12 and 60 km/h ), stop then check again the tyre pressure using the kit to confirm the effective repair of the tyre.

With a tyre repaired using this type of kit, do not exceed a speed of 80 km/h and do not drive more than 125 miles (200 km).

You must contact a CITROËN dealer or a qualified workshop to have the repair checked and the tyre changed.

Checking/adjusting tyre pressures

The compressor can be used, without injecting sealant, to check and, if necessary, adjust the tyre pressures.

► Remove the valve cap from the tyre and keep it in a clean place.

► Uncoil the pipe stowed under the compressor.

► Screw the pipe onto the valve and tighten firmly.

► Check that the compressor switch is in position "O".

► Fully uncoil the electric cable stowed under the compressor.

► Connect the compressor's electric plug to the vehicle's 12 V socket.

► Switch the ignition on.

► Start the compressor by placing the switch at position "I" and adjust the pressure to the value shown on the vehicle's tyre pressure label.

To deflate: press the black button located on the compressor pipe, near the valve connection.

If after 7 minutes the pressure of 2 bar is not reached, the tyre is damaged; contact a CITROËN dealer or a qualified workshop for assistance.

► Once the correct pressure is reached, put the switch in position "O".

► Remove the kit and stow it.

► Refit the cap on the valve.