Tool kit
Set of tools supplied with the vehicle.
Its content depends on your vehicle's equipment:
- Temporary puncture repair kit.
- Spare wheel.
These tools are specific to the vehicle and may vary according to the level of equipment.
Do not use them for any other purpose.
Access to the tools
Depending on version, the tool kit is stored in a bag or in a storage box in the boot.
List of tools

- Chock to immobilise the vehicle (depending on equipment)
- Socket for the security bolts (located in the glove box) (depending on equipment)
To adapt the wheelbrace to the special 'security' bolts. - Removable towing eye
For more information on Towing the vehicle and using the removable towing eye, refer to the corresponding section.
With temporary puncture repair kit

- 12 V compressor with cartridge of sealant and speed limit sticker
For temporary repair of a tyre and to adjust the tyre pressure.
For more information on the Temporary puncture repair kit, refer to the corresponding section.
With spare wheel

- Wheelbrace
For removing the wheel bolts. - Jack with integrated handle
To raise the vehicle. - Wheel bolt cap removal tool (depending on equipment)
For removing the wheel bolt head finishers on alloy wheels.
For more information on the Spare wheel, refer to the corresponding section.
The jack must only be used to change a wheel with a damaged or punctured tyre.
Do not use any jack other than the one supplied with the vehicle.
If the vehicle does not have its original jack, contact a CITROËN dealer or a qualified workshop to obtain the one that was intended by the manufacturer.
The jack meets European standards, as defined in the Machinery Directive 2006/42/CE, and also complies with UKCA requirement, as defined by the Supply of Machinery (Safety) Regulations 2008 No.1597.
The jack does not require any maintenance.