Powertrain
Specifications
In this manual: Powertrain
~3min read
Lubricants, Fluids, Sealers and Adhesives
| Part Number | Specifications | |
| Automatic Transmission Fluid / XT-12-QULV | XU7J-M2K949-AA | WSS-M2C949-A |
Capacities
| Liters | |
|---|---|
| Transmission Fluid | 4.76 qt (4.5 L) |
General Specification
| Item | Specification |
| Transmission Filled Mass | 248.00 lb (112.49 kg) |
Differential Bearing Preload Shim Selection Table
| Measurement | Differential Shim Service Part Number | Differential Shim Thickness | Technical part number suffix is printed on the adjustment shim |
| 0.0236 in (0.6 mm) | 7T4Z-4067-J | 0.0197 in (0.5 mm) | HK |
| 0.0246 in (0.625 mm) | 7T4Z-4067-X | 0.0207 in (0.525 mm) | JC |
| 0.0256 in (0.65 mm) | 7T4Z-4067-A | 0.0217 in (0.55 mm) | KA or KB |
| 0.0266 in (0.675 mm) | 7T4Z-4067-B | 0.0226 in (0.575 mm) | Los Angeles |
| 0.0276 in (0.7 mm) | 7T4Z-4067-C | 0.0236 in (0.6 mm) | Massachusetts |
| 0.0285 in (0.725 mm) | 7T4Z-4067-D | 0.0246 in (0.625 mm) | No data |
| 0.0295 in (0.75 mm) | 7T4Z-4067-E | 0.0256 in (0.65 mm) | Pennsylvania |
| 0.0305 in (0.775 mm) | 7T4Z-4067-F | 0.0266 in (0.675 mm) | RA |
| 0.0315 in (0.8 mm) | 7T4Z-4067-G | 0.0276 in (0.7 mm) | South Africa |
| 0.0325 in (0.825 mm) | 7T4Z-4067-N | 0.0285 in (0.725 mm) | TA |
| 0.0335 in (0.85 mm) | 7T4Z-4067-J | 0.0295 in (0.75 mm) | UA |
| 0.0344 in (0.875 mm) | 7T4Z-4067-K | 0.0305 in (0.775 mm) | Virginia |
| 0.0354 in (0.9 mm) | 7T4Z-4067-L | 0.0315 in (0.8 mm) | HA |
| 0.0364 in (0.925 mm) | 7T4Z-4067-M | 0.0325 in (0.825 mm) | Y.A. |
| 0.0374 in (0.95 mm) | 7T4Z-4067-N | 0.0335 in (0.85 mm) | ZA |
| 0.0384 in (0.975 mm) | 7T4Z-4067-P | 0.0344 in (0.875 mm) | AB |
| 0.0394 in (1 mm) | 7T4Z-4067-Q | 0.0354 in (0.9 mm) | BB |
| 0.0404 in (1.025 mm) | 7T4Z-4067-R | 0.0364 in (0.925 mm) | CB |
| 0.0413 in (1.05 mm) | 7T4Z-4067-S | 0.0374 in (0.95 mm) | BD |
| 0.0423 in (1.075 mm) | 7T4Z-4067-T | 0.0384 in (0.975 mm) | EB |
| 0.0433 in (1.1 mm) | 7T4Z-4067-U | 0.0394 in (1 mm) | FB |
Final Drive Pinion Bearing Shim Selection Chart
| Measurement | Final Drive Pinion Shim Service Part Number | Final Drive Pinion Shim Thickness | Technical part number suffix is printed on the adjustment shim |
| 0.0295 in (0.75 mm) | DG9Z-7X367-B | 0.0246 in (0.625 mm) | BA or BB |
| 0.0305 in (0.775 mm) | DG9Z-7X367-C | 0.0256 in (0.65 mm) | CA or CB |
| 0.0315 in (0.8 mm) | DG9Z-7X367-D | 0.0266 in (0.675 mm) | DA or BD |
| 0.0325 in (0.825 mm) | DG9Z-7X367-E | 0.0276 in (0.7 mm) | advisor |
| 0.0335 in (0.85 mm) | DG9Z-7X367-F | 0.0285 in (0.725 mm) | FA |
| 0.0344 in (0.875 mm) | DG9Z-7X367-G | 0.0295 in (0.75 mm) | G.A. |
| 0.0354 in (0.9 mm) | DG9Z-7X367-H | 0.0305 in (0.775 mm) | GA |
| 0.0364 in (0.925 mm) | DG9Z-7X367-J | 0.0315 in (0.8 mm) | JA |
| 0.0374 in (0.95 mm) | DG9Z-7X367-K | 0.0325 in (0.825 mm) | KA |
| 0.0384 in (0.975 mm) | DG9Z-7X367-L | 0.0335 in (0.85 mm) | Los Angeles |
| 0.0394 in (1 mm) | DG9Z-7X367-M | 0.0344 in (0.875 mm) | Massachusetts |
| 0.0404 in (1.025 mm) | DG9Z-7X367-N | 0.0354 in (0.9 mm) | No data |
| 0.0413 in (1.05 mm) | DG9Z-7X367-P | 0.0364 in (0.925 mm) | Pennsylvania |
| 0.0423 in (1.075 mm) | DG9Z-7X367-R | 0.0374 in (0.95 mm) | RA |
| 0.0433 in (1.1 mm) | DG9Z-7X367-C | 0.0384 in (0.975 mm) | South Africa |
| 0.0443 in (1.125 mm) | DG9Z-7X367-T | 0.0394 in (1 mm) | TA |
| 0.0453 in (1.15 mm) | DG9Z-7X367-U | 0.0404 in (1.025 mm) | UA |
| 0.0463 in (1.175 mm) | DG9Z-7X367-V | 0.0413 in (1.05 mm) | Virginia |
| 0.0472 in (1.2 mm) | DG9Z-7X367-H | 0.0423 in (1.075 mm) | HA |
| 0.0482 in (1.225 mm) | DG9Z-7X367-I | 0.0433 in (1.1 mm) | Y.A. |
| 0.0492 in (1.25 mm) | DG9Z-7X367-A | 0.0443 in (1.125 mm) | AB |
Test yourself
A quick Ford Escape quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?