Active Park Assist (if equipped)
The system assists you in entering and exiting parking spaces. The sensors are used to detect parking spaces. The system then steers, accelerates, brakes, and shifts gears as necessary to maneuver into or out of the parking space.
Using Active Park Assist
The Park button is located next to the gear selector on the center console.
Press the Park button to display full-screen notifications. Press either the Park button or the soft keys on the display to switch between the Park In Parallel, Park In Perpendicular, or Park Out Parallel modes.
Entering a Parking Space
- Press the Active Park Assist button.
- Use the turn signal lever to select a parking space on the driver or passenger side of your vehicle.
- Drive your vehicle approximately 3 ft (1 m) from and parallel to other parked vehicles when searching for a parking space.
- Press and hold the brake pedal.
- Release the steering wheel and shift to neutral (N).
- Press and hold the Active Park Assist button.
- Release the brake pedal to allow the vehicle to park.
Parking Space Exit
The system only helps you park in parallel parking spaces.
- Press the Active Park Assist button.
- Use the turn signal lever to select the direction for exiting.
- Press and hold the brake pedal.
- Release the steering wheel and shift to neutral (N).
- Release the parking brake.
- Press and hold the Active Park Assist button.
- Release the brake pedal to allow the vehicle to move.
Canceling Active Park Assist
To cancel Park Assist at any time, shift out of neutral (N).
Pausing Active Park Assist
To pause Park Assist at any time, release the Active Park Assist button.
The vehicle stops until you press and hold the Active Park Assist button again.
Active Park Assist Troubleshooting


Test yourself
A quick Ford Explorer quiz: every answer comes with an explanation and a link to the manual page.