ISOFIX anchorage points
WARNING
When using the ISOFIX system, use the anti-rotation device.
We recommend using the top tether or support
Your vehicle is equipped with ISOFIX anchorage points suitable for all approved ISOFIX child seats.
The ISOFIX system consists of two rigid arms on the child seat, which attach to the anchorage points on the outer rear seats, at the point where the seat cushion and seatback meet.
The top tether anchorage points for child seats with a top tether are located behind the outer rear seats.
Top tether anchorage points

Securing a child seat with the top tether
WARNING
Do not attach the tether strap to any point other than the designated anchorage point.
Tip: Where necessary, remove the luggage compartment cover to make installation easier. See Luggage Compartment Covers (page 115).

1. Place the child seat on the rear seat cushion and fold the corresponding seatback forward. See Rear Seats (page 88).
2. Remove the head restraint. See Head Restraints (page 85).
WARNING
Make sure the top tether strap is not slack or twisted and is correctly positioned in the anchorage point.
3. Route the tether strap to the anchorage point.
WARNING
Make sure the seatback is secured and fully latched in the catch.
4. Push the seatback to the upright position.

5. Push the child seat firmly rearward to engage the lower ISOFIX anchorages.
6. Press the seat belt webbing down as instructed by the child seat manufacturer.
Test yourself
A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.