Park Aid

Rear Parking Aid (IF EQUIPPED)

~2min read

The sensors are located on the rear bumper.

The sensors are active when the transmission is in Reverse (R) and the vehicle speed is below 5 km/h. When the Parking Aid warning tone sounds, the audio system volume may be reduced.

A warning tone sounds when your vehicle approaches an object. As your vehicle gets closer to the object, the tone frequency increases. The warning tone sounds continuously when an object is 12 in (30 cm) or less from the center of the rear bumper.

Ford Fusion. Rear Parking Aid (IF EQUIPPED)

The sensor detection range is up to 70 in (180 cm) from the rear bumper.

If the system detects a malfunction, a warning tone sounds and a message appears in the information display.

The system detects large objects when you shift into Reverse (R) and one of the following occurs:

  • Your vehicle is moving backward at low speed.
  • Your vehicle is stationary, but an object is approaching the rear of your vehicle at low speed.

Your vehicle is moving backward at low speed and an object is moving toward your vehicle, for example another vehicle moving at low speed.

If your vehicle remains stationary for two seconds, the audible warning turns off. If your vehicle moves backward again, the tone sounds again.

Object Distance Indicator (if equipped)

Ford Fusion. Rear Parking Aid (IF EQUIPPED)

The system shows the distance to the object in the information display.

  • As the distance to the object decreases, the indicator segments light up and move toward the vehicle icon.
  • If the system does not detect an object, the distance indicator segments are gray.

When you shift into Reverse (R), the system provides audible warnings and a visual indication when your vehicle is moving and an object is moving toward your vehicle. When you stop your vehicle, the audible warnings stop after two seconds. The visual indication remains on while the transmission is in Reverse (R).

Test yourself

A quick Ford Fusion quiz: every answer comes with an explanation and a link to the manual page.