Emergency equipment

Removing jump-start cables

4steps
~24min
2/5difficulty
Done 0 of 4

Remove the jump leads in the reverse order of the connection procedure.

Note: In the illustration, the vehicle at the bottom is the one with the charged battery, used to charge the battery of the vehicle with the flat battery.
Avviamento veicolo con cavi volanti
  1. Remove the jump lead from the unpainted metal ground point.
  2. Remove the jump lead from the negative (-) terminal of the battery in the second vehicle.
  3. Remove the jump lead from the positive (+) terminal of the battery in the second vehicle.
  4. Remove the jump lead from the positive (+) terminal of the battery in the vehicle with the flat battery.
After starting the vehicle with the flat battery and removing the jump leads, run the engine at idle for a few minutes so the engine computer can return to idle conditions.

Post-collision alert system

The system flashes the turn signal lights in the event of a severe impact that deploys an airbag (front, side, side curtain airbag or Safety Canopy system) or activates the seat belt pretensioners.

The lights turn off when:

  • the emergency control button is pressed.
  • the vehicle loses power.
  • The unlock button on the remote is pressed.

Test yourself

A quick Ford Ka quiz: every answer comes with an explanation and a link to the manual page.