Hyundai Accent Quiz
PCV Valve

Canister purge solenoid valve

In this manual: PCV Valve
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

Before disconnecting, label the vacuum hoses so that they can be reinstalled in their correct positions.

PROCEDURE

1. Disconnect the vacuum hose from the solenoid valve.
2. Disconnect the electrical connector from the valve.
3. Connect a vacuum pump to the port to which the vacuum hose with the red stripe was connected.

4. Создайте разрежение и проверьте, когда подается и отключается напряжение,

4. Apply vacuum and check when voltage is applied to and removed from the solenoid valve.

5. Измерьте сопротивление между клеммами электромагнитного клапана очистки канистры

5. Measure the resistance between the terminals of the canister purge solenoid valve.
Resistance: 26 Ω at 20 °C

Battery voltage Normal condition
When voltage is applied No vacuum
When voltage is removed Vacuum present

Fuel filler cap

Крышка топливоналивной горловины оборудована вакуумным предохранительным клапаном,

The fuel filler cap is equipped with a vacuum relief valve to prevent fuel vapor from leaking into the atmosphere.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.