Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Front Door Belt Inside Weatherstrip Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
3steps
~18min
2/5difficulty
Done 0 of 3

Replacement

  1. Remove the front door trim. (Refer to Front Door - "Front Door Trim")
  2. Remove the front door belt inside the weatherstrip (A).
  3. To install, reverse the removal procedure.
    • When installing, install it by first pressing the inner part (main assembly point) of the arrow against the door frame.
    • Replace any damaged clips (or pin-type retainers).

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.