Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Front Door Side Weatherstrip Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
5steps
~30min
2/5difficulty
0102030405028.421N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Replacement

[Front Door Side Weatherstrip]

  1. Loosen the front door adjusting washer (B) mounting bolt.

    Tightening torque: 18.6 ~ 28 N·m

  2. Disconnect the clips, then remove the front door side weatherstrip (A).
  3. To install, reverse the removal procedure.
    • Replace any damaged clips (or pin-type retainers).

[Front Door Side Body Weatherstrip]

  1. Disconnect the clips, then remove the front door side weatherstrip (A).
  2. To install, reverse the removal procedure.
    • Replace any damaged clips (or pin-type retainers).

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.