Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Front Door Belt Outside Weatherstrip Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
3steps
~18min
2/5difficulty
0102030405021N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Replacement

  1. Lower the front door window glass to the lowest position by pressing the power window switch.
  2. Loosen the mounting screws and remove the front door belt outside weatherstrip (A).

    Tightening torque: 1.0 ~ 2 N·m

  3. To install, reverse the removal procedure.
    • Replace any damaged clips (or pin-type retainers).

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.