Operation of the Function

Display and Control

• After selecting "High Beam Assist" in the settings menu, High Beam Assist will operate by following the procedure below.

- Place the headlight switch in the AUTO position and push the headlight lever toward the instrument panel. The High Beam Assist indicator ( ) will illuminate on the cluster and the system will be activated.
- When the system is activated, the high beams will turn on when vehicle speed is above 40 km/h. When vehicle speed is below 25 km/h, the high beams will not turn on.
- The high beam indicator ( ) will illuminate on the cluster when the high beams are on.

• When the High Beam Assist system is operating, if the headlight lever or switch is used, the system operates as follows:

- If you pull the headlight lever toward you when the high beams are off, the high beams will turn on without canceling High Beam Assist. When you release the headlight lever, the lever will return to the neutral position and the high beams will turn off.
- If you pull the headlight lever toward you when the high beams are turned on by the High Beam Assist system, the low beams will turn on and the system will turn off.
- If the headlight switch is moved from AUTO to another position (HEADLIGHT/POSITION/OFF), High Beam Assist will turn off and the corresponding indicator will illuminate.

• When the High Beam Assist system is operating, the high beams will switch to low beams if any of the following conditions occur:

- When an oncoming vehicle is detected.
- When the taillights of a vehicle ahead are detected.
- When a motorcycle or bicycle is detected by the headlights or taillights.
- When ambient light is bright enough that high beams are not required.
- When street lights or other light sources are detected.