Rear Wheel Alignment - Toe-in, Tire Wear

TOE-IN Specified Value: 3 - 7 mm

• Adjust the rear wheel toe-in by changing the length of the suspension trailing arms (by turning the ends).

Left trailing arm end: turning clockwise increases the toe-in.

Right trailing arm end: turning clockwise decreases the toe-in.

Each full turn of the end changes the toe-in by approximately 6 mm (0.6°).

• When adjusting the toe-in, turn the cam bolt to the left or right by no more than 90° from the center position.

After adjustment, tighten the end lock nuts to the specified torque.

Specified Tightening Torque:

50 - 60 N·m

TIRE WEAR 1. Measure the tire tread depth.

Tire tread depth (minimum allowable value): 1.6 mm

2. If the tread depth is less than the minimum allowable value, replace the tire.

When the tread depth reaches the minimum allowable value, tread wear indicator bars appear on the tire.