Front Door Trim Repair Procedures

Replacement

Be careful not to scratch or puncture the airbag cover and upper door opening trim, as these parts are made of fragile material (real wood). Wear gloves to avoid cutting your hands.

When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components. Be careful not to scratch the door trim and other parts.

1. 1
   After loosening the mounting clips, remove the front door inner frame cover (A).

   Be careful not to break the corner (B).

   

2. 2
   Using a flat-tip tool or puller, remove the front door pull handle cap (A).

   

3. 3
   Pull the front door inside handle with a flat-blade screwdriver and remove the cap (A) through the opening inside the handle.

   

4. 4
   Loosen the screws and remove the lower front door trim panel (A) using a flat-tip screwdriver.

   

5. 5
   Remove the front door inside handle (A).
6. 6
   Disconnect the front door extension connector (B).

   

7. 7
   Install in the reverse order of removal.

   Make sure the connector is properly connected. Check that the door locks/unlocks and opens/closes properly. Check that the window operates properly.